Category:
N/A
Location: BR Reference year: 1977 - 2074

Electricity Brazilian hydroelectric power plants, 1kWh (product system)

The LCI covers all relevant process steps / technologies for the construction and operation of an specific hydropower plant in Brazil. The inventory is based on data from interviews and power plant construction reports of Itaipu Binacional. The dam construction started in 1975, and finished during 1...
Dataset type
N/A
IBICT
Not reviewed
For sale
Go to dataset
Category:
N/A
Location: BR Reference year: 1977 - 2074

Itaipu hydroelectric power plant

The LCI covers all relevant process steps / technologies for the construction of an specific hydropower plant in Brazil. The inventory is based on data from interviews and power plant construction reports of Itaipu Binacional. The dam construction started in 1975, and finished during 1986. The first...
Dataset type
N/A
IBICT
Not reviewed
For sale
Go to dataset
Category:
N/A
Location: BR Reference year: 1977 - 2074

Electricity Brazilian hydroelectric power plants, 1kWh (product system)

Good overall data quality. Energy carrier mix information based on official statistical information. Detailed LCI of the two major hydroelectric power plants in Brazil were used. Inventory is partly based on primary industry data, partly on secondary literature data.
Dataset type
N/A
IBICT
Not reviewed
For sale
Go to dataset
Category:
N/A
Location: BR Reference year: 1984 - 2046

Electricity from Tucuruí power plant, at power plant, 1 kWh - 3.6 MJ (Energy)

Additional remarks: Diesel consumption derived from flow diagram in Pires, A.C. (2012) 2012Z. The LCI covers all relevant process steps / technologies for the construction and operation of an specific hydropower plant in Brazil. The inventory is based on data from power plant construction reports of...
Dataset type
N/A
IBICT
Not reviewed
For sale
Go to dataset
Category:
Materials production/Other mineralic materials
Location: EU-28 Reference year: 2013 - 2023

Gypsum plasterboard

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a good overall data quality. The inventory is mainly based on industry data and is completed, where necessary, by secondary data. End-of-life recycling stage is not in...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Processes/EESAC/2014#009 Bentonite/Bentonite ELCD
Location: RER Reference year: 2013 - 2023

Bentonite granular, sodium activated

Specific data collection and process modelling were performed in accordance with ISO 14040 and 14044 series. Process related data were collected from 8 production sites for sodium activated bentonite products located in the EU (28) countries + Morocco + Turkey. The data were then consolidated by pro...
Dataset type
N/A
ELCD
Not reviewed
Free
Category:
Processes/EESAC/2014#009 Bentonite/Bentonite ELCD
Location: RER Reference year: 2013 - 2023

Bentonite powder, sodium activated

Specific data collection and process modelling were performed in accordance with ISO 14040 and 14044 series. Process related data were collected from 8 production sites for sodium activated bentonite products located in the EU (28) countries + Morocco + Turkey. The data were then consolidated by pro...
Dataset type
N/A
ELCD
Not reviewed
Free
Category:
End-of-life treatment/Material recycling
Location: EU-28 Reference year: 2013 - 2023

Recycling of gypsum plasterboard

The data set covers the (gate-to-gate) gypsum plasterboard recycling process. Included are the energy consumption (electricity and diesel) of crushing, mechanical separation of paper from the gypsum core of plasterboard and fine grinding of gypsum. The transport of plaster board waste to the recycli...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
N/A
Location: GLO Reference year: 2018 - 2023

GLO: Steel ECCS Global 2018 worldsteel. 1kg, typical thickness between 0.13 - 0.49 mm. typical width between 600 - 1100 mm

Tin-Free (ECCS). Also known as Electrolytic Chrome Coated Steel (ECCS). Obtained by electro plating a thin finished cold rolled coil with a thin layer of chrome. It can be found on the market in coil or in sheets and is further processed into finished products by the manufacturers. ECCS is used prim...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: GLO Reference year: 2018 - 2023

GLO: Steel Electrogalvanized Global 2018 worldsteel. 1kg, typical thickness between 0.3 - 3 mm. typical width between 600 - 2100 mm

Electro-galvanised steel. Obtained by electro-plating finished cold rolled steel with a thin layer of zinc or zinc-nickel to provide corrosion resistance. It can be found on the market in coil or in sheets and is further processed into finished products by the manufacturers. Electrogalvanized Steel...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: GLO Reference year: 2018 - 2023

GLO: Steel Engineering steel Global 2018 worldsteel. 1kg

Engineering Steel is rolled on a hot rolling mill. It can be found on the market and is further processed into finished products by the manufacturers This steel is used in the manufacture of tools, dies, components for engines, drives, equipment, transmissions, etc.
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: GLO Reference year: 2018 - 2023

GLO: Steel finished cold rolled coil Global 2018 worldsteel. 1kg, typical thickness between 0.3 - 3 mm. typical width between 600 - 2100 mm

Finished cold rolled coil. Obtained by heat treatment (annealing) and strain-hardening of cold rolled steel in a way to achieve final mechanical properties making the steel suitable for further uses (forming and bending). Finished Cold Rolled Steel includes a wide range of different steels which can...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: GLO Reference year: 2018 - 2023

GLO: Steel cold rolled coil Global 2018 worldsteel. 1kg, typical thickness between 0.15 - 3 mm. typical width between 600 - 2100 mm

Cold rolled coil. Obtained by a further thickness reduction of a pickled hot rolled coil. This step is achieved at low temperature in a cold-reduction mill. It can be found on the market in coil, but requires a further heating process before being manufactured into finished products. The various typ...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: GLO Reference year: 2018 - 2023

GLO: Steel hot dip galvanised Global 2018 worldsteel. 1kg, typical thickness between 0.3 - 3 mm. typical width between 600 - 2100 mm

Hot-dip galvanised steel. Obtained by passing cold rolled coil through a molten zinc bath, in order to coat the steel with a thin layer of zinc to provide corrosion resistance. It can be found on the market in coil or in sheets and is further processed into finished products by the manufacturers. Ho...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: GLO Reference year: 2018 - 2023

GLO: Steel Hot Rolled Coil Global 2018 v2 worldsteel. 1kg, typical thickness between 2 - 7 mm. typical width between 600 - 2100 mm

Hot rolled coil. Steel coil rolled on a hot-strip mill. It can be found on the market in coil or in sheets and is further processed into finished products by the manufacturers. The various types of hot rolled steel have applications in virtually all sectors of industry: transport, construction, ship...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: GLO Reference year: 2018 - 2023

GLO: Steel organic coated Global v3 2018 worldsteel. 1kg, typical thickness between 0.15 - 1.5 mm. typical width between 600 - 1300 mm

Organic coated Steel. Obtained by coating a steel substrate with organic layers such as paint or laminated film. The substrate is mainly hot dip galvanized coil but may also be electrogalvanized coil, finished cold rolled coil or tin-free steel. It can be found on the market in coil or in sheets and...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: GLO Reference year: 2018 - 2023

GLO: Steel pickled hot rolled coil Global 2018 worldsteel. 1kg, typical thickness between 2 - 7 mm. typical width between 600 - 2100 mm

Pickled hot rolled coil. Hot rolled steel from which the iron oxides present at the surface have been removed in a pickling process. It can be found on the market in coil or in sheets and is further processed into finished products by the manufacturers. The various types of pickled hot rolled steel...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: RAS Reference year: 2018 - 2023

Asia: Steel cold rolled coil Asia 2018 worldsteel. 1kg, typical thickness between 0.15 - 3 mm. typical width between 600 - 2100 mm

Cold rolled coil. Obtained by a further thickness reduction of a pickled hot rolled coil. This step is achieved at low temperature in a cold-reduction mill. It can be found on the market in coil, but requires a further heating process before being manufactured into finished products. The various typ...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: RAS Reference year: 2018 - 2023

Asia: Steel Electrogalvanized Asia 2018 worldsteel. 1kg, typical thickness between 0.3 - 3 mm. typical width between 600 - 2100 mm

Electro-galvanised steel. Obtained by electro-plating finished cold rolled steel with a thin layer of zinc or zinc-nickel to provide corrosion resistance. It can be found on the market in coil or in sheets and is further processed into finished products by the manufacturers. Electrogalvanized Steel...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: RAS Reference year: 2018 - 2023

Asia: Steel Engineering steel Asia 2018 worldsteel. 1kg

Engineering Steel is rolled on a hot rolling mill. It can be found on the market and is further processed into finished products by the manufacturers This steel is used in the manufacture of tools, dies, components for engines, drives, equipment, transmissions, etc.
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: RAS Reference year: 2018 - 2023

Asia: Steel finished cold rolled coil Asia 2018 worldsteel. 1kg, typical thickness between 0.3 - 3 mm. typical width between 600 - 2100 mm

Finished cold rolled coil. Obtained by heat treatment (annealing) and strain-hardening of cold rolled steel in a way to achieve final mechanical properties making the steel suitable for further uses (forming and bending). Finished Cold Rolled Steel includes a wide range of different steels which can...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: GLO Reference year: 2018 - 2023

GLO: Value of Scrap 2018 - 1 kg weighted average worldsteel. 1 kg

Steel scrap. Steel scrap is the scrap produced from a product at the end of its life and is available on the scrap market in many different forms. This steel scrap product represents an average steel scrap. The "value of scrap" is calculated on the basis of the steel product cradle-to-gate LCIs.
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: GLO Reference year: 2018 - 2023

GLO: Steel seamless pipe Global 2018 worldsteel. 1kg

Seamless pipe. The seamless tube is manufactured using a process called “extrusion”. During this process a solid steel bar is pierced though the center using a die, turning the solid steel into a tube which is processed into the correct shape and dimensions. They have an advantage in aggressive envi...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: GLO Reference year: 2018 - 2023

GLO: Steel sections Global 2018 worldsteel. 1kg

Sections. A steel section rolled on a hot rolling mill. Steel Sections include I-beams, H-beams, wide-flange beams, and sheet piling. It can be found on the market for direct use. This product is used in construction, multi-story buildings, industrial buildings, bridge trusses, vertical highway supp...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: GLO Reference year: 2018 - 2023

GLO: Steel tinplated Global 2018 worldsteel. 1kg, typical thickness between 0.13 - 0.49 mm. typical width between 600 - 1100 mm

Tinplate. Obtained by electro plating a thin finished cold rolled coil with a thin layer of tin. It can be found on the market in coil or in sheets and is further processed into finished products by the manufacturers. Electrolytic tin plated steel is used primarily in food cans, industrial packaging...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: GLO Reference year: 2018 - 2023

GLO: Steel plate Global 2018 worldsteel. 1kg, typical thickness between 2 to 20 mm. The maximum width is 1860 mm

Plate. A flat steel sheet rolled on a hot rolling mill. It can be found on the market in sheets and is further processed into finished products by the manufacturers. Heavy plate is used in a large number of sectors: structural steels, shipbuilding, pipes, pressure vessels, boilers, heavy metal struc...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: GLO Reference year: 2018 - 2023

GLO: Steel rebar Global 2018 worldsteel. 1kg

Rebar. A steel reinforcing bar is rolled on a hot rolling mill. It can be found on the market for direct use or is further processed into finished products by the manufacturers. This product is used to strengthen concrete in highway and building construction also as primary product for the wire rod...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: GLO Reference year: 2018 - 2023

GLO: Steel welded pipe Global 2018 worldsteel. 1kg

Welded pipe. A flat plate steel coil that is bended and welded into a tube. It can be found on the market for final use. A heavy-wall pipe is technically used to transport fluids (e.g. oil, gases, water, chemicals).
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: GLO Reference year: 2018 - 2023

GLO: Steel wire rod Global v2 2018 worldsteel. 1kg

Wire rod. Wire rod is a rolled steel product, produced from a semi and having a round, rectangular or other cross-section. Particularly fine cross-sections may be achieved by subsequent cold forming (drawing). Wire rod is wound into coils and transported in this form.
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: GLO Reference year: 2018 - 2023

GLO: Steel UO pipe Global 2018 worldsteel. 1kg

UO pipe. UO pipe is usually large in diameter and produced one piece at a time by forming plates. The plate is first pressed into a U shape by the U-press, and then into an O shape by the O-press. Because relatively thick material is used for making UO pipes, submerged arc welding is used for joinin...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: RAS Reference year: 2018 - 2023

Asia: Steel hot dip galvanised Asia 2018 worldsteel. 1kg, typical thickness between 0.3 - 3 mm. typical width between 600 - 2100 mm

Hot-dip galvanised steel. Obtained by passing cold rolled coil through a molten zinc bath, in order to coat the steel with a thin layer of zinc to provide corrosion resistance. It can be found on the market in coil or in sheets and is further processed into finished products by the manufacturers. Ho...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: RAS Reference year: 2018 - 2023

Asia: Steel Hot Rolled Coil Asia 2018 worldsteel. 1kg, typical thickness between 2 - 7 mm. typical width between 600 - 2100 mm

Hot rolled coil. Steel coil rolled on a hot-strip mill. It can be found on the market in coil or in sheets and is further processed into finished products by the manufacturers. The various types of hot rolled steel have applications in virtually all sectors of industry: transport, construction, ship...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: EU Reference year: 2018 - 2023

EU: Steel hot dip galvanised EU 2018 worldsteel. 1kg, typical thickness between 0.3 - 3 mm. typical width between 600 - 2100 mm

Hot-dip galvanised steel. Obtained by passing cold rolled coil through a molten zinc bath, in order to coat the steel with a thin layer of zinc to provide corrosion resistance. It can be found on the market in coil or in sheets and is further processed into finished products by the manufacturers. Ho...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: EU Reference year: 2018 - 2023

EU: Steel Hot Rolled Coil EU 2018 v2 worldsteel. 1kg, typical thickness between 2 - 7 mm. typical width between 600 - 2100 mm

Hot rolled coil. Steel coil rolled on a hot-strip mill. It can be found on the market in coil or in sheets and is further processed into finished products by the manufacturers. The various types of hot rolled steel have applications in virtually all sectors of industry: transport, construction, ship...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: EU Reference year: 2018 - 2023

EU: Steel organic coated EU 2018 worldsteel. 1kg, typical thickness between 0.15 - 1.5 mm. typical width between 600 - 1300 mm

Organic coated Steel. Obtained by coating a steel substrate with organic layers such as paint or laminated film. The substrate is mainly hot dip galvanized coil but may also be electrogalvanized coil, finished cold rolled coil or tin-free steel. It can be found on the market in coil or in sheets and...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: EU Reference year: 2018 - 2023

EU: Steel pickled hot rolled coil EU 2018 worldsteel. 1kg, typical thickness between 2 - 7 mm. typical width between 600 - 2100 mm

Pickled hot rolled coil. Hot rolled steel from which the iron oxides present at the surface have been removed in a pickling process. It can be found on the market in coil or in sheets and is further processed into finished products by the manufacturers. The various types of pickled hot rolled steel...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: RAS Reference year: 2018 - 2023

Asia: Steel pickled hot rolled coil Asia 2018 worldsteel. 1kg, typical thickness between 2 - 7 mm. typical width between 600 - 2100 mm

Pickled hot rolled coil. Hot rolled steel from which the iron oxides present at the surface have been removed in a pickling process. It can be found on the market in coil or in sheets and is further processed into finished products by the manufacturers. The various types of pickled hot rolled steel...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: RAS Reference year: 2018 - 2023

Asia: Steel plate Asia 2018 worldsteel. 1kg, typical thickness between 2 to 20 mm. The maximum width is 1860 mm

Plate. A flat steel sheet rolled on a hot rolling mill. It can be found on the market in sheets and is further processed into finished products by the manufacturers. Heavy plate is used in a large number of sectors: structural steels, shipbuilding, pipes, pressure vessels, boilers, heavy metal struc...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: EU Reference year: 2018 - 2023

EU: Steel Engineering steel EU 2018 worldsteel. 1kg

Engineering Steel is rolled on a hot rolling mill. It can be found on the market and is further processed into finished products by the manufacturers This steel is used in the manufacture of tools, dies, components for engines, drives, equipment, transmissions, etc.
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: EU Reference year: 2018 - 2023

EU: Steel finished cold rolled coil EU 2018 worldsteel. 1kg, typical thickness between 0.3 - 3 mm. typical width between 600 - 2100 mm

Finished cold rolled coil. Obtained by heat treatment (annealing) and strain-hardening of cold rolled steel in a way to achieve final mechanical properties making the steel suitable for further uses (forming and bending). Finished Cold Rolled Steel includes a wide range of different steels which can...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: RSA Reference year: 2018 - 2023

RSA: Steel wire rod LA 2018 worldsteel. 1kg

Wire rod. Wire rod is a rolled steel product, produced from a semi and having a round, rectangular or other cross-section. Particularly fine cross-sections may be achieved by subsequent cold forming (drawing). Wire rod is wound into coils and transported in this form.
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: EU Reference year: 2018 - 2023

EU: Steel cold rolled coil EU 2018 worldsteel. 1kg, typical thickness between 0.15 - 3 mm. typical width between 600 - 2100 mm

Cold rolled coil. Obtained by a further thickness reduction of a pickled hot rolled coil. This step is achieved at low temperature in a cold-reduction mill. It can be found on the market in coil, but requires a further heating process before being manufactured into finished products. The various typ...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: RAS Reference year: 2018 - 2023

Asia: Steel sections Asia 2018 worldsteel. 1kg

Sections. A steel section rolled on a hot rolling mill. Steel Sections include I-beams, H-beams, wide-flange beams, and sheet piling. It can be found on the market for direct use. This product is used in construction, multi-story buildings, industrial buildings, bridge trusses, vertical highway supp...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: RAS Reference year: 2018 - 2023

Asia: Steel tinplated Asia 2018 worldsteel. 1kg, typical thickness between 0.13 - 0.49 mm. typical width between 600 - 1100 mm

Tinplate. Obtained by electro plating a thin finished cold rolled coil with a thin layer of tin. It can be found on the market in coil or in sheets and is further processed into finished products by the manufacturers. Electrolytic tin plated steel is used primarily in food cans, industrial packaging...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: RAS Reference year: 2018 - 2023

Asia: Steel wire rod Asia 2018 worldsteel. 1kg

Wire rod. Wire rod is a rolled steel product, produced from a semi and having a round, rectangular or other cross-section. Particularly fine cross-sections may be achieved by subsequent cold forming (drawing). Wire rod is wound into coils and transported in this form.
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: RSA Reference year: 2018 - 2023

RSA: Steel rebar LA 2018 worldsteel. 1kg

Rebar. A steel reinforcing bar is rolled on a hot rolling mill. It can be found on the market for direct use or is further processed into finished products by the manufacturers. This product is used to strengthen concrete in highway and building construction also as primary product for the wire rod...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: RAS Reference year: 2018 - 2023

Asia: Steel rebar Asia 2018 worldsteel. 1kg

Rebar. A steel reinforcing bar is rolled on a hot rolling mill. It can be found on the market for direct use or is further processed into finished products by the manufacturers. This product is used to strengthen concrete in highway and building construction also as primary product for the wire rod...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: EU Reference year: 2018 - 2023

EU: Steel plate EU 2018 worldsteel. 1kg, typical thickness between 2 to 20 mm. The maximum width is 1860 mm

Plate. A flat steel sheet rolled on a hot rolling mill. It can be found on the market in sheets and is further processed into finished products by the manufacturers. Heavy plate is used in a large number of sectors: structural steels, shipbuilding, pipes, pressure vessels, boilers, heavy metal struc...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: EU Reference year: 2018 - 2023

EU: Steel rebar EU 2018 worldsteel. 1kg

Rebar. A steel reinforcing bar is rolled on a hot rolling mill. It can be found on the market for direct use or is further processed into finished products by the manufacturers. This product is used to strengthen concrete in highway and building construction also as primary product for the wire rod...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: EU Reference year: 2018 - 2023

EU: Steel sections EU 2018 worldsteel. 1kg

Sections. A steel section rolled on a hot rolling mill. Steel Sections include I-beams, H-beams, wide-flange beams, and sheet piling. It can be found on the market for direct use. This product is used in construction, multi-story buildings, industrial buildings, bridge trusses, vertical highway supp...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: EU Reference year: 2018 - 2023

EU: Steel tinplated EU 2018 worldsteel. 1kg, typical thickness between 0.13 - 0.49 mm. typical width between 600 - 1100 mm

Tinplate. Obtained by electro plating a thin finished cold rolled coil with a thin layer of tin. It can be found on the market in coil or in sheets and is further processed into finished products by the manufacturers. Electrolytic tin plated steel is used primarily in food cans, industrial packaging...
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: EU Reference year: 2018 - 2023

EU: Steel welded pipe EU 2018 worldsteel. 1kg

Welded pipe. A flat plate steel coil that is bended and welded into a tube. It can be found on the market for final use. A heavy-wall pipe is technically used to transport fluids (e.g. oil, gases, water, chemicals).
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
N/A
Location: EU Reference year: 2018 - 2023

EU: Steel wire rod EU 2018 worldsteel. 1kg

Wire rod. Wire rod is a rolled steel product, produced from a semi and having a round, rectangular or other cross-section. Particularly fine cross-sections may be achieved by subsequent cold forming (drawing). Wire rod is wound into coils and transported in this form.
Dataset type
N/A
worldsteel
Not reviewed
Free
Go to dataset
Category:
Materials production/Metals and semimetals
Location: EU-27 Reference year: 2012 - 2022

Lead sheet mix

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to grave inventory with a good overall data quality. The inventory is mainly based on industry data and is completed, where necessary, by secondary data. This data set is based on primary da...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Glass and ceramics
Location: RER Reference year: 2015 - 2022

Continuous filament glass fibre (assembled rovings)

Dataset type
N/A
ELCD
Not reviewed
Free
Category:
Materials production/Glass and ceramics
Location: RER Reference year: 2015 - 2022

Continuous filament glass fibre (direct rovings)

Dataset type
N/A
ELCD
Not reviewed
Free
Category:
Materials production/Glass and ceramics
Location: RER Reference year: 2015 - 2022

Continuous filament glass fibre (dry chopped strands)

Dataset type
N/A
ELCD
Not reviewed
Free
Category:
Processes/EESAC/GCC
Location: RER Reference year: 2011 - 2021

GCC slurry

Specific data collection and process modelling were performed in accordance with ISO 14040 and 14044 series. Process related data were collected on 13 GCC production sites located in 7 European countries + Norway + Turkey. The data were then consolidated by process stage (horizontal aggregation). Th...
Dataset type
N/A
ELCD
Not reviewed
Free
Category:
Processes/EESAC/PCC
Location: RER Reference year: 2011 - 2021

PCC dry

Specific data collection and process modelling were performed in accordance with ISO 14040 and 14044 series. Process related data were collected on 14 PCC production sites located in 7 European countries + Norway + Turkey. The data were then consolidated by process stage (horizontal aggregation). Th...
Dataset type
N/A
ELCD
Not reviewed
Free
Category:
Materials production/Organic chemicals
Location: EU-27 Reference year: 2011 - 2021

Hydrogen peroxide mix (ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a good overall data quality. The inventory is mainly based on industry data and is completed, where necessary, by secondary data. This dataset is based on primary data...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: GLO Reference year: 2011 - 2021

Palm kernel oil methylester (incl. LUC, incl. peat emissions, 75 cm, ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a good overall data quality. It represents an production average based on the year 2011. The inventory is mainly based on latest literature data and is completed, wher...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Processes/EESAC/GCC
Location: RER Reference year: 2011 - 2021

GCC dry

Specific data collection and process modelling were performed in accordance with ISO 14040 and 14044 series. Process related data were collected on 13 GCC production sites located in 7 European countries + Norway + Turkey. The data were then consolidated by process stage (horizontal aggregation). Th...
Dataset type
N/A
ELCD
Not reviewed
Free
Category:
Materials production/Organic chemicals
Location: EU-27 Reference year: 2011 - 2021

Cumene (Isopropylbenzene) (C9H12, ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a good overall data quality. The inventory is mainly based on industry data and is completed, where necessary, by secondary data. This dataset is based on primary data...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: EU-27 Reference year: 2011 - 2021

Diethanolamine (ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a good overall data quality. The inventory is mainly based on secondary data. This dataset is based on secondary data from internationally adopted production processes...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: EU-27 Reference year: 2011 - 2021

Ethylene Oxide (No. 8 - Matrix, ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a good overall data quality. It represents an production average based on the year 2011. The inventory is mainly based on industry data and is completed, where necessa...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: EU-27 Reference year: 2011 - 2021

Dimethylsulphate (DMS) Production via Ethers and Sulphur Trioxide (ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a good overall data quality. The inventory is mainly based on secondary data. This dataset is based on secondary data from internationally adopted production processes...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: EU-27 Reference year: 2011 - 2021

Dimethylamine (Production from Alcohols, ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a good overall data quality. The inventory is mainly based on secondary data. This dataset is based on secondary data from internationally adopted production processes...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: GLO Reference year: 2011 - 2021

Crude coconut oil (incl. LUC, ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a good overall data quality. It represents an production average based on the year 2011. The inventory is mainly based on latest literature data and is completed, wher...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: GLO Reference year: 2011 - 2021

Crude palm oil (incl. LUC; incl. peat emissions, ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a good overall data quality. It represents an production average based on the year 2011. The inventory is mainly based on latest literature data and is completed, wher...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: GLO Reference year: 2011 - 2021

Crude palm kernel oil (incl. LUC; incl. peat emissions, ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a good overall data quality. It represents an production average based on the year 2011. The inventory is mainly based on latest literature data and is completed, wher...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: GLO Reference year: 2011 - 2021

Coconut oil methyl ester (incl. LUC, ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a good overall data quality. It represents an production average based on the year 2011. The inventory is mainly based on latest literature data and is completed, wher...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: EU-27 Reference year: 2011 - 2021

C16-18 TEA-Quat (oleo based) (No. 24 - Matrix, ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a very good overall data quality. It represents an production average based on the year 2011. The inventory is mainly based on industry data and is completed, where ne...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: EU-27 Reference year: 2011 - 2021

C16-18 fatty alcohol from palm oil (No. 13a - Matrix, ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a good overall data quality. The inventory is mainly based on secondary data. This dataset is based on secondary data from internationally adopted production processes...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: EU-27 Reference year: 2011 - 2021

Chloroacetic acid by catalysed chlorination of acetic acid (ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a good overall data quality. The inventory is mainly based on secondary data. This dataset is based on secondary data from internationally adopted production processes...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: EU-27 Reference year: 2011 - 2021

C8-18 Alkyl amidopropyl betaine (oleo based) (No. 28 - Matrix, ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a very good overall data quality. It represents an production average based on the year 2011. The inventory is mainly based on industry data and is completed, where ne...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: EU-27 Reference year: 2011 - 2021

Cocamide diethanolamine (oleo based) (No. 16 - Matrix, ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a good overall data quality. It represents an production average based on the year 2011. The inventory is mainly based on industry data and is completed, where necessa...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: EU-27 Reference year: 2011 - 2021

C16-18 fatty alcohol from beef tallow (No. 13 - Matrix, ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a good overall data quality. The inventory is mainly based on secondary data. This dataset is based on secondary data from internationally adopted production processes...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: EU-27 Reference year: 2011 - 2021

C12-14 Alkyl sulphate (oleo/petro based) (No. 5 - Matrix, ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a good overall data quality. It represents an production average based on the year 2011. The inventory is mainly based on industry data and is completed, where necessa...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: EU-27 Reference year: 2011 - 2021

Aminoethylethanolamine (AEEA) Production from MEG and Ammnonia (ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a good overall data quality. The inventory is mainly based on secondary data. This dataset is based on secondary data from internationally adopted production processes...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: EU-27 Reference year: 2011 - 2021

C12-14 Alcohol Ether Sulphates (oleo based), 2 mole EO (No. 6 - Matrix, ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a very good overall data quality. It represents an production average based on the year 2011. The inventory is mainly based on industry data and is completed, where ne...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: EU-27 Reference year: 2011 - 2021

C16-18 Alcohol (oleo) Ethoxylate, >20 moles EO (No. 14 - Matrix, ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a good overall data quality. It represents an production average based on the year 2011. The inventory is mainly based on industry data and is completed, where necessa...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: EU-27 Reference year: 2011 - 2021

C12-15 Alcohol (petro) Ethoxylate, 7 moles EO (No. 12 - Matrix, ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a very good overall data quality. It represents an production average based on the year 2011. The inventory is mainly based on industry data and is completed, where ne...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: EU-27 Reference year: 2011 - 2021

C12-15 Alcohol (petro) Ethoxylate, 3 moles EO (No. 11 - Matrix, ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a very good overall data quality. It represents an production average based on the year 2011. The inventory is mainly based on industry data and is completed, where ne...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: EU-27 Reference year: 2011 - 2021

C12-14 Amine Oxide (oleo/petro based) (No. 20 - Matrix, ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a very good overall data quality. It represents an production average based on the year 2011. The inventory is mainly based on industry data and is completed, where ne...
Dataset type
N/A
ELCD
Not reviewed
For sale
Category:
Materials production/Organic chemicals
Location: EU-27 Reference year: 2011 - 2021

C12-14 Alcohol (oleo) Ethoxylate, 7 moles EO (No. 10 - Matrix, ELCD)

The data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a very good overall data quality. It represents an production average based on the year 2011. The inventory is mainly based on industry data and is completed, where ne...
Dataset type
N/A
ELCD
Not reviewed
For sale