treatment of aluminium scrap, new, at remelter, UPR, ecoinvent 3.6, Undefined

Categories:
ISIC4 categories:
C:Manufacturing/24:Manufacture of basic metals/242:Manufacture of basic precious and other non-ferrous metals/2420:Manufacture of basic precious and other non-ferrous metals
Location:
GLO - Global
Reference year: 2005 - 2005
Description

Location: GLO - Global
This dataset is based on two sources: the European Aluminium Association 2005 LCI data (EAA, 2008); and (2) the ecoinvent v2.2 dataset for the same activity (Althaus, 2009), itself largely based on EAA data from 2000. Priority was given to data contained in EAA (2008); Althaus (2009) was used only in cases where it was found to be more complete that EAA (2008). Note that both sources are European in scope - this GLO dataset is therefore an extrapolation.
Remelters use mainly reverbatory furnaces, and this dataset is based on this furnace technology only.
The dataset excludes, for lack of access to data, salt slag and dross recycling. According to EAA, this data gap represents approximately 10-20% of potential impacts, as calculated using the CML 2001 method.
The following emissions to air are reported in EAA 2008 but excluded from this dataset: CO (0.095 kg/tonne secondary aluminium), Dust/particulates (0.041 kg/tonne secondary aluminium), NOx (0.329 kg/tonne secondary aluminium), SO2 (0.051 kg/tonne secondary aluminium), and VOC (0.050 kg/tonne secondary aluminium). These are assumed to be combustion emissions or electricity production emissions, conclusion arrived at by comparing gate-to-gate emissions with the cradle-to-gate emissions also reported in EAA 2008. Their inclusion wouldhave led to double-counting.
Undefined unit processes (UPRs) are the unlinked, multi-product activity datasets that form the basis for all of the system models available in the ecoinvent database. This is the way the datasets are obtained and entered into the database by the data providers. These activity datasets are useful for investigating the environmental impacts of a specific activity (gate-to-gate), without regard to its upstream or downstream impacts.

Technology

Average technology for the aluminium recycled in Europe

Process type
Unit
Supported nomenclature
ecoinvent 3.6
LCI modeling approach
Before modeling
Multifunctional modeling
NONE
Format
ECOSPOLD2
Aggregation type
NOT_APPLICABLE
Data provider
ecoinvent
Review status
External
Cost
For sale
License

ecoinvent EULA

Contact
support@ecoinvent.org